HomeFAQSearchMemberlistUsergroupsRegisterLog in

Share | 

 Vulcan .22

View previous topic View next topic Go down 

Posts : 1
Join date : 2012-08-30

PostSubject: Vulcan .22   Thu Aug 30, 2012 3:14 pm

Hi all

I have a Webley Vulcan .22, Serial No: 561955.

It was working perfect until my son broke the barrel to load a pellet and accidentally pulled the trigger before closing the gun. The barrel sprung up as if trying to close by its self, when the trigger was pulled, but now, every time I try to close the barrel with the spring taut & ready to fire, the barrel will not now close completely flush.

I removed the stock, and cocked the barrel & could see that the cocking lever looks as if it needs to slide further forward (As it does when the rifle is fired if I break the barrel and just close it without loading the spring it lines up perfect) It looks like the Cocking lever is being stopped from sliding forward enough by the “Main spring guide”? I’m just guessing Main spring guide from looking at a parts list on line, or some metal part as you can see it!

Any advice/help will be greatly received from a very fed up new member! Sad
Back to top Go down
View user profile

Posts : 1
Join date : 2012-11-14

PostSubject: Re: Vulcan .22   Thu Nov 15, 2012 1:22 am


Does the barrel close properly when not cocked?
Back to top Go down
View user profile
Vulcan .22
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
» Going to cross over on a 2010 Vulcan Voyager
» New to the darkside 08 Vulcan 2000 Classic LT
» A couple of videos of my 2005 Kawasaki Vulcan 2000 Riding the Darkside.
» fitting a 205/60 to my Vulcan
» Long shot, but darksiding a 04' Vulcan 500???

Permissions in this forum:You cannot reply to topics in this forum
 :: The Webley Workshop-
Jump to: